SEG Fabric Free-Standing Lightboxes

Product Description

SEG Fabric Free-Standing Lightboxes consist of an aluminium extrusion frame kit and a SEG tension fabric graphic. As standard, the frame is 100mm thick, for our premium option, the frame is 120mm thick and comes with stabilising feet.

The fabric graphic is printed using a dye-sublimation process onto 310gsm backlit polyester. This process gives your image great colour vibrancy. The graphic is finished with a silicone kedar edging and is then slotted into the aluminium channel and tensioned around the edge.

Our Free-Standing SEG Fabric Lightboxes are double-sided and as such are provided with two graphics as standard. You can have the same message both sides or have two different promotional graphics.

A nylon pull tab is fitted to each Lightbox graphic as standard to easily remove the graphic from the frame. By default, this tab is affixed to the upper corner of the graphic to prevent children reaching it. Please let us know if you would prefer the pull tab to be located elsewhere or not supplied at all.

All lightboxes come with an allen key for assembly, 3 meter cable and CE marked transformer and fitted UK plug.

Differences between premium and standard are based around the lumens, quality and number of LEDs used.

Standard SEG Fabric Free-Standing Lightboxes

Our standard free-standing lightboxes are egde-lit, which means the LED lights are located around the inside edge.

Premium SEG Fabric Free-Standing Lightboxes

Premium Lightboxes have lights along the long edges for better light quality. Premium Lightboxes can also be provided with a backlit board for larger displays but this is at an additional cost and does require some skilled installation.

Premium Lightboxes can be requested at larger and/or bespoke sizes - please contact us for a quotation.

Please note: lighting anomalies can be highlighted with plain designs or large blocks of a single colour. It is therefore recommended to use busy, vibrant designs for best results.