Stretch Fabric Premium Stands

Product Description

Stretch Fabric Premium Stands are made up of a strong, lightweight, tubular aluminium frame and a printed fabric cover which is designed to fit snugly over the frame and secured at the bottom with a zip fastening to maintain tension.

We print onto a high quality 260gsm stretch fabric cover on the front with a white reverse as standard, but we can also print double-sided with either the same design or different, depending on your requirements at no extra cost. We use a dye-sublimation process to give you the most vibrant and eye-catching stand to make sure your business is noticed. Each graphic is then hand sewn and finished.

You will receive one allen key for assembly and a free carry bag for transportation. The graphic can be easily folded and placed into the bag to ensure it stays in perfect condition whilst in transit and storage.

Additional or replacement graphics can be ordered separately. Old graphics can be recycled with other textiles.

Specification

Assembly Recommendations

1. Match the indicated numbered stickers and snap together the frame pieces.
2. Slide the graphic over the frame.
   • To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right. Slowly pull the graphic to the bottom of the frame. You will now have part of the rear graphic on the front, or vice-versa. Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position.
3. Fasten the zip under the bottom edge of the frame.
4. Using the provided allen key, screw the frame into the base.

Please Note

This item is recommended for indoor use only, and is not suitable for outdoor use.

Some visibility of the frame through the graphic is possible. This is due to the nature of fabrics that are not completely opaque. This can occur when the graphic is subject to strong lighting, especially from above or behind. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.

We make every effort to finish these graphics as accurately and consistently as possible. But due to the nature of printing and the cutting / finishing of fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics.

Graphics can be washed in a regular washing machine on a 30 degree wash without detergents. Always allow graphics to completely dry before using or storing.